SPC 67690 - FORD MERCURY ADJUSTABLE REAR CAMBER BALL JOINT 1.25 DEGREES

Use this adjustable ball joint to get 1.25 camber change on Ford's D3 Platform AWD vehicles like the Five Hundred, Taurus, Sable, MKS, and TaurusX from 2005-2010. Many of these vehicles run negative camber in the rear, but there is no factory correction. To get change, you will need to press the OE ball joint out of the knuckle and replace it with the adjustable offset stud design from SPC. Once loosely reassembled, you will be able to easily turn the 8mm hex on the stud and watch camber change. Torque down the nut and your adjustment is locked in. SPC recommends either a shop press or our 72509 ball joint press with a short receiver to press out the OE ball joint and press in the adjustable ball joint. On this adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available. Vehicle Specific

• Ford: Five Hundred 2005 - 2007, Ford: Freestyle 2005 - 2007, Ford: Taurus 2008 - 2009, Ford: Taurus X 2008 - 2009, Mercury: Montego 2005 - 2007, Mercury: Sable 2008 - 2009

Attributes:

• Brand Name: Specialty Products Company / SPC Performance
• GTIN: 00082642676904
• Add-On: 72509, 4423, 4424, 81139, 37995, 12710

Extended Information:

• Country of Origin: CN
• Emissions : CARB Eligible
• Life Cycle Status: Available To Order

Packing Information:

• Quantity of Each: 1
• Package UOM: EA
• Dimension: 3.88 x 3.38 x 4.75 inches
• Weight: 1 POUNDS

PDF: