Pro-Flo 4 Standalone ECU And Harness Kit No Distributor

The Pro-Flo 4 Standalone ECU and Harness Kit (PN 35721) provides an economical EFI system solution ideal for legacy Pro-Flo EFI system users or those with an existing yet poor-performing competitor EFI system looking to convert to PF4 EFI. This kit can be used with any application for which Edelbrock offers a Pro-Flo 4 Distributor. The Standalone EFI kit comprises the ECU, supporting sensors, a wide-band O2 sensor, and the wiring harness. The ECU controls both fuel and spark and includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio. Minimal setup and tuning adjustments are required with Edelbrock’s E-Tuner Software for IOS and Android tablets and cell phones. The software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. The customer must purchase a Pro-Flo distributor (specific to the application) and provide the induction system, EFI manifold, throttle body, 1-bar MAP sensor, fuel rails, injectors, pump, regulator, and lines. Users must refer to the Calibration Matrix in the instructions for the required injector size, depending on engine cubic inches and HP requirements. Required injector sizes 29 lb./hr., 35 lb./hr., 42 lb./hr., and 60 lb./hr. Compatibility with forced induction applications requires 80 lb./hr. injectors and a 2-bar MAP sensor.

• Economical EFI System solution for users with existing EFI system and components.
• Simplified installation, providing all existing features of Pro Flo 4 EFI

Vehicle Specific

• Solution for Pro Flo 4 EFI on any existing EFI Intake Manifold Assembly that a Pro Flo 4 Distributor can support.

Attributes:

• Brand Name: Edelbrock
• GTIN: 00085347899265
• Air Metering Style: Speed Density
• CAN-BUS Support: Yes
• Coil Per Cylinder Ignition Support: No
• Cross sell / Upsell Products: All Pro Flo 4 EFi kits All Pro Flo 4+ EFI Kits All EFi Intake Manifolds
• Data Logger: Yes
• Datalogging Support: Yes
• Display Included: No
• Distributor Included: No
• Drive-By-Wire Capable: No
• ECU Included: Yes
• EGR: No
• Fuel Injectors included: No
• Fuel Pressure Regulator Included: No
• Fuel Pump Included: No
• Fuel Rails Included: No
• Handheld Controller Included: No
• High or Low Impedence: High
• IAC Motor Included: Yes
• IAT Sensor Included: Yes
• Injection Style: Sequential Port Injection
• Injector Connector Type: Minitimer / EV1
• Intake Manifold Included: No
• MAP Sensor Included: Yes
• Maximum Horsepower with Gas: 900
• Metering Style: Speed Density
• Notes: Tuning supported by E Tuner 4 App
• Number of Connectors Supported: 8
• Oxygen Sensor Included: Yes
• Power Adder Compatible: Yes
• Quantity: Sold as a Kit
• Related Products: All Edelbrock and FAST EFI Manifolds 22746 Ignition Coil FAST and Edelbrock Throttle Bodies IAC Adapter FAST #307022, Edelbrock #3855 Edelbrock Pico and Siemens Fuel Injectors 29LbHr, 35LbHr, 42LbHr. 60LbHr, 80LbHr Air Cleaners EFI Fuel systems 36031 Edelbrock Fuel Sump 8041 Throttle and Trans Kick Down Bracket
• Required Products: Fuel Injection Intake assembly including Fuel Rails and Injectors
• Self Tuning: Yes
• TPS Sensor Included: No
• Throttle Body Included: No
• Timing Control Compatible: Yes
• Transmission Controller Included: No
• User Tunable: Yes
• Wiring harness included: Yes

Extended Information:

• Country of Origin: US
• Emissions : Racing or Pre-Emissions Use Only

Packing Information:

• Quantity of Each: 1
• Package UOM: EA
• Dimension: 12.7 x 10.3 x 7.8 inches
• Weight: 5.35 POUNDS

PDF: