Go EFI 4 600 HP Power Adder Bright Aluminum EFI System

Designed for applications making at least 6 in. of vacuum at idleUpgrading to electronic fuel injection is one of the best ways to improve the performance of your classic vehicle and FiTech is making the swap even easier with their new In-Tank Fuel Pump Module. The universal assembly allows you to easily mount the required high pressure fuel pump in the best location, the tank! The assembly secures the supplied high pressure pump in tanks with depths ranging from 6” – 15”. The fuel is pumped to a top billet mount assembly to -6 AN male fittings for the supply and return ports. The billet mount was designed with a low profile and places the ports in a parallel position to help when routing the fuel lines. The vent port is on the other side to ease routing the line near the fill tube. To ensure uninterrupted delivery of clean fuel, two sizes of sock/filters are provided, a standard 11 square-inch design and a large, 35 square-inch version. The Universal In-Tank Pump Module is supplied with everything you need for installation including a high output 255 LPH pump capable of supporting up to 600 horsepower engines (normally aspirated). Push-lock style AN fittings are also included along with gaskets and wiring terminals. When it comes to upgrading to electronic fuel injection, setting up a proper high pressure fuel system is paramount to the overall performance of the vehicle. FiTech Go-Spark CD ignitions enhance the performance of fuel injected or carbureted engines. The high-output multi-spark technology ensures complete combustion and improves drivability by delivering full energy sparks from idle through high-rpm. Optimize your EFI or carb ignition setup with FiTech Go-Spark CD ignitions.

• Works with 4-, 6-, & 8-cylinder engines
• Uses easy-to-replace, GM-type sensors and Bosch 4.2 wideband oxygen sensors
• Wet flow swirl spray annual discharge obtains complete atomization
• Built-in pressure regulator
• Many safety features and OBD II fault code readouts
• Works with 12 volt ignition systems
• Spark control without the need for an external spark box
• Adjustable for tanks from 6” to 15” of depth
• Billet aluminum top features -6 fuel bosses
• Low profile for improved clearance and improved fuel line positioning
• Supplied with 255 LPH pump, seals, fittings and filter/socks
• Supports engines up to 600 HP
• One sealed connector for a clean installation
• Multi-spark to 2,500 rpm
• Maximum 10,000 rpm
• Can handle 25 lbs. of boost from a blow-through turbo, blower, or single roots supercharger—and can also take a single stage of wet nitrous
• Hand-held controller with 8GB data log capabilities
• Can change air/fuel ratios and ignition timing on-the-fly
• Air conditioning idle speed input kick-up
• Internal MAP sensor
• -06 AN fuel inlet fittings
• Two adjustable fan control switches

Attributes:

• Brand Name: FiTech Fuel Injection
• GTIN: 00812061036276
• EPA Classification: 3

Extended Information:

• Country of Origin: China
• Life Cycle Status: Available To Order

Packing Information:

• Quantity of Each: 1
• Package UOM: EA
• Weight: 0 POUNDS